based upon your mounting surroundings, you might want to safe the MR55 to its mount place. Your MR55 might be secured in many techniques. In case the MR55 has been installed utilizing the mount cradle, it ought to be secured by using security screw (Torx safety screws are integrated) and/or Kensington lock. If the mount cradle was not utilised, the MR55 can even now be secured utilizing a Kensington lock
We suggest updating the application driver with the wireless NIC in your customer product Should the client is struggling to begin to see the configured SSIDs. Alternatively, you'll be able to disable AX performance for 2.4GHz and 5GHz bands working with RF profiles.
The MR55 could be operated in “operate darkish” manner For extra protection also to reduce the visibility from the entry issue. On this mode, the LED won't be illuminated. This mode could be enabled via Meraki dashboard.
utilizing ideal mounting hardware for your precise form of junction box, attach the mount cradle to the junction box
If mounting to an electrical junction box, feed the Ethernet cable with the cable obtain hole inside the mount cradle.
Security screw – The accessory package involves screws that could be used to safe the access point to your mount cradle. participating the security screw stops accidental dislodging and theft.
Your MR55 is equipped having a multi-color LED gentle to the front from the device to Express information about method operation and efficiency:
suggestion: Pre-assemble rubber spacers and screws towards the mount cradle. The mount cradle can then be held with just one hand whilst another hand holds a screwdriver. If mounting your MR55 to the dropped ceiling, skip to the "electrical power the MR55" part.
receiving readily available notices on-line suggests not needing to await it to arrive during the mail or even the recognize obtaining shed or misplaced.
Configure the static IP address, Internet mask, gateway IP deal with and DNS servers this AP will use on its wired connection.
to guarantee your MR55 performs optimally instantly pursuing set up, it is usually recommended that you just facilitate a firmware upgrade ahead of mounting your MR55.
Then regulate the MR55 to guidebook the MR55s base slot into the cradle’s base tab right until it clicks website into put. the moment in position, the MR55 needs to be secured towards the cradle by utilizing one of many incorporated screws inside the cradle’s base tab.
If a firewall is in place, it ought to allow for outgoing connections on specific ports to particular IP addresses. The most current list of outbound ports and IP addresses on your individual organization can be found in this article.
We’re committed to utilizing the most effective technologies available to shield your own information; further safety steps continue to keep you Secure and protected.
connect the T-rail clips to the T-rail by rotating them and snapping them into place as revealed. The black foam pads must be compressed slightly soon after installation.
Kensington lock – The accessibility stage includes a hard point that enables it to generally be secured to any close by permanent construction employing a standard Kensington lock.